Installation recommendation
The decorative fireplace natural gas and refractory logs heaters must be installed according to manufacturer's instructions to ensure proper operation of the unit. (7.24.1)
Connection
A corrugated metal flue pipe with a length of 2 ft (600 mm) can be used to connect a decorative device. (6.21.3)
Shutoff valve
The fireplace must have a shutoff valve easily accessible manual can be installed onto the pipe to be provided with a diameter equal to that of the pipe and be located within 2 ft (600 mm) of the device . (6.18.2)
BAN & RECOMMENDATION
> Do not block the openings of the gas fireplace logs with the burner refractory and other accessories.
> Do not use stainless steel corrugated pipe (WardFlex, TracPipe, etc.) without union between the valve stop and the device.
> Do not use an extension cord (extension) to connect a device or its accessories to a socket wall power.
What are the things to consider when choosing a home for my home?
Since it is not necessary to connect them to an existing fireplace, direct vent fireplaces can be installed almost anywhere in your home and dressed with combustible materials.
The dimensions of the fireplace and the space it will occupy the room.
If this is an installation on the ground floor, consider the aesthetic rather than a high heat output.
If there is a facility in the basement where he usually colder, aesthetics and heat output are equally important.
the dimensions of the room. A model with high heating output will heat a small room faster than a model at a lower yield, but it will probably turn off more often than the latter.
Article of the new home of CAA House (advantage & disadvantages)
